| Tecknit Europe |
|---|
| About Us |
| Products |
| Technical Archive |
| Order Status |
| Exhibition Diary |
| Contact Us |
| Info Request |
Tecknit Inc. USA
Click here to Visit Tecknit Inc. USA
Shielding problem?
 |
Product Information |  |
|---|
ELASTO-BOND is a ready to use one component non-conductive silicone rubber based adhesive sealant. The adhesive system is an RTV that cures by reacting with moisture in the air. The compound is ready to use and does not require preparation or mixing. Contact our sales team for further product information and consultation. |
|---|
| Application Information. ELASTO-BOND adhesive sealant is recommended wherever a flexible bond is required between a metal surface and an ELASTOMET® or ELASTOFOAM® gasket. To ensure optimum performance the bond thickness should not exceed .005 to .010 in. Depending on the degree of adhesion that is required, gaskets can be spot bonded or continuously bonded. |
 |
|---|
Specifications
| Material Description | Part Number: 72-00177 |
|---|---|
| Resin | Silicone RTV |
| Uncured Consistency | Nonslumping Paste |
| Cured Condition | Flexible |
| Performance Characteristics | |
| Cured Specific Gravity*: | 1.04 |
| Temperature Range | -65°F to 392°F [-54°C to 200°C] |
| Peel Strength (min) | ASTM D-1002 200 psi [1.37 MPa] |
| Colour | White |
| Shelf Life | (unopened container) 6 mos.min.(when stored at 21°C) |
| Recommended Cure | 72 hours at room temperature and 50% RH |
| Full Cure | 7 Days |
| Clean Up Solvent | Denatured Alcohol |
| Packaging** | Tube 1.5 oz [43g] |
|
Home |
Next |
|
|---|---|